IIRC, all the gauge illumination is from LEDs that are soldered to the circuit board(s?) in the instrument cluster. While theoretically possible to change over to red LEDs, I highly doubt it is doable, practically speaking.

 

Well crap....was a nifty Idea at least....thanks

 

One thought that I had was to put a red film over the front of the instrument cluster. However, it might be too dark for daylight (non-illuminated) use.

Sort of like this: Amazon.com: DIYAH 12 X 48 Inches Self Adhesive Headlight, Tail Lights, Fog Lights Tint Vinyl Film (Red) : Automotive

It’s cheap, and you could try it out on the instrument panel before committing to pulling the instrument cluster to get a more professional look.

 

you know, I may see If I can get ahold of a dash at a salvage yard and see if I can
do something with that.

 

Instead of replacing the LED's you might be able to overlay them with red lens material.

Here's a good vid on how to take the cluster assembly apart, it's a 2008 so yours might be a little different:

 

Ill do some research thanks!