My left turn signal is not working. I replaced the bulb and it still doesn't work. When I flip the signal arm in the vehicle it clicks normally 4 times then clicks rapidly. The bulb did not come on so I replaced it with no results.
Turn signal out..
bhpazanski
1 - 5 of 5 Posts
Joined
·
3 Posts
My left turn signal is not working. I replaced the bulb and it still doesn't work. When I flip the signal arm in the vehicle it clicks normally 4 times then clicks rapidly. The bulb did not come on so I replaced it with no results.
Joined
·
12,339 Posts
It's either a bad socket, a broken wire at the socket, or a bad ground connection (G112).
If it's the ground connection the fix is to cut the old eyelet off, strip the wires back to good metal, then install a new eyelet.
More info on the ground connection below:
G110, G111, and G112 ground location and wiring diagrams
G110 G111 & G112 G111 G112
www.jeeppatriot.com
Joined
·
3 Posts
Thank you! Will try.It's either a bad socket, a broken wire at the socket, or a bad ground connection (G112).
If it's the ground connection the fix is to cut the old eyelet off, strip the wires back to good metal, then install a new eyelet.
More info on the ground connection below:
G110, G111, and G112 ground location and wiring diagrams
G110 G111 & G112 G111 G112
Joined
·
1,318 Posts
Hey there! If you continue to run into concerns, we would suggest a dealership visit. If you decide to go that route and need support, let us know.
Kate
Jeep Cares
Joined
·
3 Posts
Thanks, Kate. Yeah, got to take it in.
1 - 5 of 5 Posts
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
