Me thinks the panel inside the wheel well removed will gain me access to the bulb. I can touch it from the engine compartment but will never get two hands in there or on it. Maybe its not such a big deal to do, it is what it is. Am I on the right track to replace this bulb.
Accessing the bulb for the front running light bulb?
TnTom
1 - 10 of 10 Posts
Me thinks the panel inside the wheel well removed will gain me access to the bulb. I can touch it from the engine compartment but will never get two hands in there or on it. Maybe its not such a big deal to do, it is what it is. Am I on the right track to replace this bulb.
Joined
·
90 Posts
Exactly what Croat said.
Use a regular screwdriver and needlenose pliers to remove punch tabs. You may need a 7mm socket to loosen screws from under th bumper. Remove inner wheel well liner. Reach in, and pull the bulb out. Replace with leds with resistors, and never worry about em again.
Use a regular screwdriver and needlenose pliers to remove punch tabs. You may need a 7mm socket to loosen screws from under th bumper. Remove inner wheel well liner. Reach in, and pull the bulb out. Replace with leds with resistors, and never worry about em again.
Joined
·
90 Posts
Figure out what bulb you need, if its a 2014 i can get you a bulb guide when i get home or just search Croats threads. Once you know the bulb size use Ebay, search led (bulb size), make sure you get an amber or yellow color, then search 50w 6ohm load resistors. You need one resistor for each turn signal. You can replace all four turn signals with 4 bulbs 4 resistors less than $20.00, and in about 1 hour of time
Joined
·
970 Posts
This is where looking at it with a different pair of eyes helps sometimes.... I was changing my bulb through the wheel well and having a difficult time. My brother says why don't you reach in down from an angle from under the hood. And would you look at that he popped out the bulb on the driver side in a minute. Real easy to reach from there.
Joined
·
90 Posts
I tried that, I could just barely touch the bulb from under the hood, but not enough to get a grip on it.
Joined
·
2,275 Posts
Dont buy autozone led's! They suuuck
1 - 10 of 10 Posts
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
