Jeep Patriot Forums banner
Cancel
Create thread New Garage Forums

SPEAKER LED HEADLIGHTS

Jump to Latest
1 - 20 of 30 Posts

SwedeSpeed

· Registered
Joined
·
144 Posts
Discussion starter · #1 ·
Hi All,

One of my Co-Workers has a 10th Anniversary Wrangler with all the bells and whistles. He has installed the Speaker LED Model 8700 Evolution headlights onto his wrangler. They can be viewed by the link provided below.

Do you know if these would fit a 2014 Jeep Patriot? If so, these are going onto my wish list after I get my new Pro Comp wrapped in Duratrac's installed :pepper:

Heres the link to the LED Headlights:
http://www.jwspeaker.com/products/headlights/#product=500249
 
Save
Reply Quote Like Like
#2 ·
The wrangler jk's use an h13 bulb, patriots do as well, if you measured the housings to ensure they were physically the same size I see no reason why it wouldn't work.
 
#4 · (Edited)
pat headlights are barely oval. someone actually installed a round halo and it looks good. yes, these would have to be retrofitted since they are made for wranglers, but the grille cutout is round, so with a little mounting fab, it could look like an oem replacement. I'm intrigued. I really dont like the 7" dish lights. I've wanted to upgrade to HID's or LED's without being a douche. you just don't put HID's in halogen housings... and having a teeny-tiny projector in a big bowl looks ridiculous.
 
#5 ·
You can try led headlights. I put lifetime led lights in my stock housings. They look good and are super bright. I've had them for about 2 months and havnt gotten flashed once. They are white not blue
 
#10 ·
i know man, me too. first I need to get some lights to even see if they fit without cutting the support braces behind the grille. then I get to figure out how to mount them. I need to see if there is a wrecked kk in my town. Might be able to combine the front braces to keep factory adjustability. doubt it.
 
#16 ·
somewhere in southern Idaho. not worth it, they dont even have a pic, and it was only 1 cracked light. I need to look at the front end of a kk to get a real idea of what to do. That's why I was hoping they had the whole vehicle there. Turns out my JY doesnt even take in newer cars. they auction those off to other JY's. so Basically if youi having something 2004 or newer, you're screwed here. Guess I'll have to see what the pull n save 2 hours north has.
 
#17 ·
moparnumber1 said:
somewhere in southern Idaho. not worth it, they dont even have a pic, and it was only 1 cracked light. I need to look at the front end of a kk to get a real idea of what to do. That's why I was hoping they had the whole vehicle there. Turns out my JY doesnt even take in newer cars. they auction those off to other JY's. so Basically if youi having something 2004 or newer, you're screwed here. Guess I'll have to see what the pull n save 2 hours north has.
Click to expand...
That's crazy. You could always send MB a PM and hope he gets on and ask for the dimensions and make your own mock up out of cardboard just to see.
 
#18 ·
Well, a while back mb was gunna ship me his old lights, but I couldnt afford it. I should send him a pm real quick see if he still has em. I'd still like to see the mounting brace but if I had the lights im sure I could mock something up real quick
 
Discussion starter · #19 ·
Save
Reply Quote Like Like
1 - 20 of 30 Posts
About this Discussion
29 Replies
9 Participants
Last post:
laxheromaddness
Jeep Patriot Forums
posts
678K
members
55K
Since
2006
Join our community to discuss the Jeep Patriot & Jeep Compass. Find answers to all your Jeep Patriot technical questions.
Full Forum Listing
Explore Our Forums
Jeep Patriot General Discussion Engine and Drivetrain Newbie Check-In Suspension and Tires Electrical and Audio