4wd doesn´t work

Fredrik · Oct 10, 2010

Hi !
After installing the electical wiring kit for my new hitch the 4wd stopped working.I removed all of it ,but it still wont work??
All fuses in the fusebox seams ok,are there some more fuses hidden?
How hard should it be to connect it to to the rear lights!!

The kit comes from Brink/Thule.

tiptronic · Oct 10, 2010

How do you know 4x4 is not working??? It will switch itself in & out without any input from you!!

Fredrik · Oct 11, 2010

The 4WD! comes on everytime i put in a gear and start driving.
Even the interior lights has stopped working.

Fredrik · Oct 12, 2010

Problem solved!It was a cable in the trunk that goes to the 4wd who had popped lose a bit.

Davo · Oct 13, 2010

That's interesting. We had a discussion on another thread as to what speeds the 4wd works at. Someone suggested putting an indicator light across the 4wd clutch. It looks like you have found a connector that might be used for this light.

btw, glad you got your machine working again :smiley_thumbs_up:

Tyler-98-W68 · Oct 13, 2010

From my testing when the !4WD light is on, the rear wheels are still recieving power. I"ve tried this by holding the 4x4 lock level up and not letting go until the light comes on.

Everytime i've done this the rear wheels still recieve power, i've also tested this by having all 4 wheels up in the air on jacks.

4wd doesn´t work

Fredrik

tiptronic

Fredrik

Fredrik

Davo

Tyler-98-W68

Top Contributors this Month

Recommended Communities