Jeep Patriot Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-15 of 15 Results
  1. Jeep Patriot General Discussion
    Hello All, will make a proper post once the job is finished. found a wheel tyre set on marketplace and fit perfectly on the car, issue was that it stuck out a good 6cm and it’s illegal to have wheels poke out past body in OZ. Some before and after shots of the car. will post some better pics...
  2. Electrical and Audio
    hey everyone- wondering if anyone has a guide or link to a video for instructions on how to replace the socket for the right rear indicator bulb on a 2014 Jeep Patriot? I’ve tried searching but there is nothing model specific. Not sure if it needs to be but don’t want to take any risks. I’ll...
  3. Interior
    Hey y'all! I've been dying to put a MOLLE tactical panel on the rear quarter window in the back of my Pat. Obviously, there's no official MOLLE gear for the Patriot so I was curious if anyone has done any DIYs or mods to create something similar? If possible, something relatively simple as I'm...
  4. Newbie Check-In
    I have a 2014 Latitude Does anyone have any "Universal" adapters... i'm looking for a Center Console Replacement, and the little cubby zone... i want to add like a Paper Towel holder there... the space is oddly irritating to me... The center console needs to preferably be able to link into a...
  5. Newbie Check-In
    Title covers the basics... Ive had my Jeep patriot since... winter of 2017? This will likely be a long post and I'd love any and all comments and thoughts! My first question is more of a procedural one - is there a common way people post their projects here? Basically, im hoping to make...
  6. Exterior
    Hey guys, Does anybody know how much square feet of film i'd need to cover all the windows except windshield. Also its going to be my first time so ill add a good amount of square feet for error. 2011 model. not sure if this info is needed. Thanks, First post.
  7. Jeep Patriot General Discussion
    I did not speak to the service rep my wife took the car in and she brought me the paper work. The car is a 11' Latitude 4WD with automatic transmission 104k Miles. The docs sayS: "20Point LC quoted RF CV SHAFT $335 FRT COVER RESEAL $665 OTD MAINT DUE PLUGS/FUEL/COOLANT/P-S/4X4...
  8. Suspension and Tires
    I put these on a few months back along with a new set of Monroe struts and STUCoils. I already had STUCoils, which gave about an inch over stock on my FDII but I wanted to get more lift without any binding of the inner CV joints (especially the front drivers side) when running disconected...
  9. Jeep Patriot General Discussion
    Hi All, I've been looking to make a storage box for the trunk of my Patriot. However, I cannot seem to design one that would allow me to still have access to the spare tire under the floor. Has anyone built a storage box for the trunk? And if so, were you able to design it in a way where you...
  10. Exterior
    Trying to make some exterior modifications to the Patriot, so quick question, has anyone made their own bull bar+installed it on their patriot themselves? I've looked around and see a bunch of Patriots that seem to have a custom bull bar but haven't found an actual thread about it..currently I...
  11. Interior
    Me and my dad recently underwent that task of building a privacy shelf for the cargo area of our jeeps. It's made out of 1/2" plywood a few 3/4" dowels and some outdoor fabric. What do you all think?
  12. Exterior
    I have been wanting a tow hook for sometime now. only problem is that i do not have $189 to spend. so this weekend i am going to try to make my own. my idea was to bolt a 1" thick bar of aluminum to the bumper where the stock tow hooks would bolt to and have that rod extend out the bumper. after...
  13. Jeep Patriot General Discussion
    Hey all, I'm looking for info on how to do custom skid plates and tow hooks on my patriot. I used the search function, but haven't found much yet. I'm mostly curious on how to do tow hooks with a trailer drop hitch. I've seen in done, but I don't know the specific process, nor do I have any...
  14. Electrical and Audio
    its been awhile since i really posted a big project. i have recently done alot and will be posting it all soon. but this post is for my halo lights. my headlights are now blue halo HID projector headlights. i will be posting pictures soon but for now i will post links to all the parts i needed.
  15. Exterior
    Well here it is as promised. My first DIY. Comments and criticism appreciated. First off tow hooks were ordered from Pollard Parts Store for 170$ shipped part number is 82212577 Second I'm cheap and didn't get the lower fascia with the vents cut out (Extra 80$). So I went to the local auto...
1-15 of 15 Results
Top