Still chasing electrical issues with my jeep. First issue is the fused B wire from the TIPM to the wcm/skreem module. It’s only being fed 1.2v direct from fuse 17 in the TIPM. I believe this is the reason I’m having ignition issues and remote issues.
Secondly the door locks are only being fed 4v rather than 12v as they are meant to be. This results in none of the central locking working although you can hear the actuators trying to move.
Any suggestions as to where it what the issue could be?
I’ve looked for a pin out diagram from the TIPM but had no luck so far
Last edited by Frazzly; 06-23-2019 at 05:51 AM.
Reason: Wrong fuse number